News
Air distributing hub
Application
Air distributor (air splitting hub) is designed to distribute air evenly across all sections of the impulse lines, as well as the splitting of the impulse line through the manifold and shut-off valves.
Ordering code for air distributors
| 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | |
| Air distributor | RV | 25 | R1 | R1/2 | 6 | 2 | B | (250d-1/4) |
Air distributor (RV), with nominal pipe passage 25 mm, with inlet thread connection R1/2, with outlet thread connection R1, with 6 outlets, located on both sides, made from stainless steel 12X18H10T (B) supplied with valves r250d.
| Parameters | Possible values | |
| Distributor model | RV – air distributor | |
| Nominal passage of collector | Dn - nominal diameter, is approximately equal to internal diameter of pipe | |
| Outlet connection thread | M1 - outlet connection thread, table 9.38. | |
| Inlet connection thread | M2 - inlet connection thread, table 9.38. | |
| Outlet quantity | N1 - quantity of outlets, table 9.38. | |
| Direction of outlets |
1 – unilateral direction of outlet nozzles 2 – bilateral direction of outlet nozzles |
|
| Material | A – carbon steel 20 Ac - zinc plated steel 20 B – stainless steel 12X18H10T At the request of the Customer it is possible to manufacture air distributors from other materials |
|
| Valve model | r250d – ball valve from brass with default nominal passage |
At the request of the Customer, it is possible to manufacture air distributors with parameters different from the table 9.38.
Design types
Table 9.38
| Drawing and ordering code template | Dn, mm | D x s, mm | M1 | M2 | N1, pcs |
|
Air distributor
|
10 | 16x5 | R3/8 |
R3/8 R1/2 R3/4 |
|
| 15 | 22 x 5 | R1/2 |
2 4 6 8 10 12 14 16 18 20 22 24 |
||
| 20 | 28 x 5 | R3/4 | |||
| 25 | 34 x 5 | R1 | |||
| 32 | 42 x 6,5 | R1 1/4 | |||
| 40 | 48 x 7 | R1 1/2 |
