Разработка и производство контрольно-измерительных приборов

+375 (214) 74-38-01
e-mail: mail@pointltd.by

-->
Яндекс.Метрика

Zanker type flow profiler

 


Manufactured according to GOST 8.586.1-5-2005

Application:
        Should be installed before flowmeter. It cancels or decreases turbulance of flow which is caused by local mechanical resistances.
Ordering code:

  1 2 3
Disc type UPP 100 A

 

Disc type flow profiler (UPP), with nominal pass 100 mm, made from carbon steel 20 (A).

  Parameters Possible values
1 Type of device UPP – Disc type flow profiler Zanker
2 Nominal pass Dn - nominal value, approximately equal to inner diameter of pipe.
3 Material A – made from carbon steel 20
B – made from stainless steel 12H18N10T (similar to AISI 321)
It's possible to use other steel required by customer.

  
Design modifications:

Notation Dn, mm S thickness, mm   D, mm
Disc type profiler UPP - Dn - S   15 2,3 39
25 3,8 57
32 4,8 65
40 5 75
50 7 87
65 8 109
80 10 120
100 13 149
125 16 175
150 20 203
200 26 259
250 33 312
300 39 363

                

  On customer request, disc type profiler can be equipped with assemby parts: flanges, seals, fittings.